2w005g thru 2w10g vishay general semiconductor document number: 88528 revision: 15-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 glass passivated single-phase bridge rectifier features ? ul recognition, file number e54214 ? ideal for printed circuit boards ? typical i r less than 0.5 a ? high case dielectric strength ? high surge current capability ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications general purpose use in ac-to-dc bridge full wave rectification for power supply, adapter, charger, lighting ballaster on consumers and home appliances applications. mechanical data case: wog epoxy meets ul 94v-0 flammability rating terminals: silver plated lead s, solderable per j-std-002 and jesd22-b102 e4 suffix for consumer grade polarity: as marked on body e4 primary characteristics i f(av) 2.0 a v rrm 50 v to 1000 v i fsm 60 a i r 5.0 a v f 1.1 v t j max. 150 c case style wog + ? ~ ~ + ? ~ ~ maximum ratings (t a = 25 c unless otherwise noted) parameter symbol 2w005g 2w01g 2w02 g 2w04g 2w06g 2w08g 2w10g unit maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current at 0.375" (9.5 mm) lead length (fig. 1) i f(av) 2.0 a peak forward surge current single sine-wave superimposed on rated load i fsm 60 a rating for fusing (t < 8.3 ms) i 2 t 15 a 2 s operating junction and storage temperature range t j , t stg - 55 to + 150 c
2w005g thru 2w10g vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88528 revision: 15-apr-08 2 note: (1) thermal resistance from junction to am bient and from junction to lead at 0.375" (9.5 mm) lead length p.c.b. mounting ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol 2w005g 2w01g 2w02g 2w 04g 2w06g 2w08g 2w10g unit maximum instantaneous forward voltage drop per diode 2.0 a v f 1.1 v maximum dc reverse current at rated dc blocking voltage per diode t a = 25 c t a = 125 c i r 5.0 500 a typical junction capacitance per diode 4.0 v, 1 mhz c j 40 20 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol 2w005g 2w01g 2w02g 2w04g 2w06g 2w08g 2w10g unit typical thermal resistance (1) r ja r jl 40 15 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode 2w06g-e4/51 1.12 51 100 plastic bag figure 1. derating curve output rectified current 0 25 50 75 100 125 150 0 0.4 0. 8 1.2 1.6 2.0 2.4 5.0 10 20 = i (pk) i (a v ) 60 hz resisti v e or ind u cti v e load capaciti v e load (per leg) am b ient temperat u re (c) a v erage for w ard o u tp u t c u rrent (a) copper pads 0.22 x 0.22" (5.5 x 5.5 mm) p.c.b. 0.375" (9.5 mm) figure 2. maximum non-repetitive peak forward surge current per diode 0 10 20 40 50 60 30 100 10 1 t a = 25 c single sine- w a v e nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a) 1.0 cycle
2w005g thru 2w10g vishay general semiconductor document number: 88528 revision: 15-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical forward characteristics per diode figure 4. typical reverse leak age characteristics per diode 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 100 t j = 25 c p u lse w idth = 300 s 1 % d u ty cycle instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) 0 20 40 60 8 0 100 0.01 0.1 1 10 100 percent of rated peak re v erse v oltage (%) instantaneo u s re v erse c u rrent ( a) t j = 100 c t j = 125 c t j = 25 c figure 5. typical juncti on capacitance per diode figure 6. typical transient thermal impedance 100 0.1 1 10 1 10 100 re v erse v oltage ( v ) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p j u nction capacitance (pf) 100 0.01 0.1 1 10 100 0.1 1 10 t - heating time (s) transient thermal impedance (c/ w ) 0.220 (5.6) 0.160 (4.1) 0.3 88 (9. 8 6) 0.34 8 ( 8 . 8 4) 1.0 (25.4) mi n . 0.060 (1.52) 0.020 (0.51) 0.032 (0. 8 1) 0.02 8 (0.71) 0.34 8 ( 8 . 8 4) 0.30 8 (7. 8 2) 0.220 (5.6) 0.1 8 0 (4.6) 0.220 (5.6) 0.1 8 0 (4.6) case style wog
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
